Today one tutorial how to make a poinsiettia or other flowers from ropepaperEsiteks asjad, mida meil kõigepealt vaja läheb: pabernöör, käärdi, PVA-liim
First things we need: ropepaper, scissors, PVA-glue
Cut 3 different size ropepaper piece. Every size you need to have 3. So finally you should have 9 pieces of ropepaper.Then holed both side of the ropepaper and turn with one hand one way and other hand the other way. It helps a little bit to open ropepaper and it will bo more easier to unravel ropepaper. Open all 9 pieces of ropepaper and leave the ends a little bit closed
Start Glueing. Add a glue on the middle and then add across another piece. Hold it with your fingers. If you have glued 3 one size pieces then start glueing the next one medium size and end with the 3 smallest pieses.
Now it should look like this:
Next we need to add some leaves. Cut 3-4 ropepaer piece and they should be a litlle bit more bigger than your biggest petals. Open it and then glue it together.
Next we add some golden pieces that are with wire. I cut the wire off so I will have only the pieces.It´s better when you have a smaller pieces. I made with the big ones because my litlle ones were run out.
Add a glue in the middle and the little golden pieces. And then let it to dry.
I used my poinsettia in christmas card.
Little tip: you can make petals round or sharp. Then you need to cut the pieces as you like ;)
If you find this tutorial useful then I would like to know that. Please be kind to leave a comment and if you use this tutorial and make some flowers then please link back to this tutorial that the others will get it to. And if You have made something useing this tutorial, then please leave a link to comments. Thank You!